The Genuine OEM Oil Pump Cover Kit 3C3Z-6616-BA is specifically tailored for 2003-2010 Ford F-250 and F-350 vehicles equipped with a 6.0 Diesel engine. This kit plays a crucial role in maintaining proper oil flow, ensuring the engine operates with optimal lubrication. Any inconsistencies or drops in oil pressure can lead to significant engine issues; this kit addresses and mitigates such problems. The part is housed in the original OEM manufacturer's packaging and mirrors the exact part available at new car dealerships. It is not a product of the aftermarket.
- Flathead screwdriver
- Socket wrench set
- Oil drain pan
- Gasket scraper
1. Begin by disconnecting the vehicle's battery to ensure safety during the replacement process.
2. Use the oil drain pan to collect any oil, and drain the engine oil from the vehicle.
3. Locate the existing oil pump cover on the engine.
4. Use the socket wrench to remove the bolts securing the old oil pump cover.
5. Remove the old oil pump cover and gasket. Use the gasket scraper to remove any residue from the engine surface.
6. Position the new Genuine OEM oil pump cover and the new gasket in place.
7. Tighten the bolts securely, ensuring an even seal to prevent any oil leaks.
8. Refill the engine with the appropriate amount and grade of engine oil.
9. Reconnect the vehicle's battery.
10. Start the vehicle and check for any oil leaks or pressure issues.
Time Required: Approximately 2-3 hours
Skill Level: Advanced
||F-250, F-350 (6.0 Diesel)