Is the Passenger side windshield cowl end cap on your 2000-2006 Silverado or Tahoe cracked or damaged? It's time to replace it with the Genuine New Driver Side Windshield Cowl End Cap, designed specifically for your vehicle. This high-quality end cap is made from durable materials and is designed to fit perfectly on your Silverado or Tahoe, ensuring that your windshield is properly protected and sealed.

Installation Instructions:

The Passenger Side Windshield Cowl End Cap is an OEM replacement part for the 2000-2006 Silverado or Tahoe. Here are the steps you need to follow to install the new cowl end cap:

Tools needed:

• Socket wrench
• Socket set
• Phillips screwdriver
• Trim panel removal tool

Skill Level:

• Intermediate

Time Needed:

• Approximately 30-45 minutes

Step 1: Remove the Old Cowl End Cap

• Open the hood of your vehicle and locate the cowl cover on the passenger side.
• Using a socket wrench and socket set, remove the screws that secure the cowl cover to the vehicle.
• Carefully lift the cowl cover up and away from the windshield.
• Using a trim panel removal tool, carefully pry the old cowl end cap away from the cowl cover and set it aside.

Step 2: Install the New Cowl End Cap

• Take the new Passenger Side Windshield Cowl End Cap and align it with the holes on the cowl cover.
• Using a Phillips screwdriver, reattach the cowl cover to the vehicle with the screws you removed in step 1.

Step 3: Test the New Cowl End Cap

• Make sure the new cowl end cap is securely in place and flush with the cowl cover.
• Check for any gaps or misalignments that could allow water or debris to enter.

That's it! With these steps, you should be able to replace the old Passenger Side Windshield Cowl End Cap on your 2000-2006 Silverado or Tahoe with the new Genuine GM part. Remember to take your time and be careful when removing and installing the cowl cover to avoid damaging the vehicle or the new part.