The Ranger Edge Escape Explorer Ignition Coil for the 2.0 Engine is a genuine Ford/Motorcraft product designed to ensure reliable performance in your vehicle. This genuine OEM auto part is an essential component in the ignition system, responsible for providing the high voltage necessary to ignite the fuel and air mixture in the engine's cylinders. Using an aftermarket or imitation ignition coil may result in poor engine performance, misfires, or even complete engine failure.
Installation Instructions:
- Start by disconnecting the negative battery cable to avoid any electrical shocks or damage.
- Locate the ignition coil on the engine, it will be attached to the spark plug.
- Remove the electrical connector from the old ignition coil and set it aside.
- Use a wrench or socket to remove the mounting bolts that hold the ignition coil in place.
- Gently pull the old ignition coil out of the engine.
- Insert the new ignition coil into the same spot where the old one was removed from.
- Tighten the mounting bolts securely to ensure the new ignition coil is held in place properly.
- Reattach the electrical connector to the new ignition coil.
- Reconnect the negative battery cable.
- Turn the engine on and ensure the new ignition coil is functioning properly.
Time and Skill Level: The installation process should take around 30 minutes to complete. It is considered an easy job that can be done by someone with basic mechanical skills.
Tools Needed:
- Wrench or socket set
VEHICLE FITMENT
Year | Make | Model | Body & Trim | Engine & Transmission |
---|---|---|---|---|
2022 | Ford | Escape | SEL, Titanium | 2.0L L4 - Gas |
2022 | Ford | Transit Connect | Titanium, XL, XLT | 2.0L L4 - Flex, 2.0L L4 - Gas |
2021 | Ford | Bronco | Badlands, Base, Big Bend, Black Diamond, Outer Banks | 2.3L L4 - Gas |
2021 | Ford | Bronco Sport | Badlands, First Edition | 2.0L L4 - Gas |
2021 | Ford | Edge | SE, SEL, Titanium | 2.0L L4 - Gas |
2021 | Ford | Escape | SEL, Titanium | 2.0L L4 - Gas |
2021 | Ford | Explorer | Base, Limited, Timberline, XLT | 2.3L L4 - Gas |
2021 | Ford | Ranger | Lariat, XL, XLT | 2.3L L4 - Gas |
2021 | Ford | Transit Connect | Titanium, XL, XLT | 2.0L L4 - Flex |
2021 | Lincoln | Corsair | Base, Reserve | 2.0L L4 - Gas, 2.3L L4 - Gas |
2020 | Ford | Edge | SE, SEL, ST-Line, Titanium | 2.0L L4 - Gas |
2020 | Ford | Escape | SEL, Titanium | 2.0L L4 - Gas |
2020 | Ford | Explorer | Base, Limited, XLT | 2.3L L4 - Gas |
2020 | Ford | Ranger | Lariat, XL, XLT | 2.3L L4 - Gas |
2020 | Ford | Transit Connect | Titanium, XL, XLT | 2.0L L4 - Flex |
2020 | Lincoln | Corsair | Base, Reserve | 2.0L L4 - Gas, 2.3L L4 - Gas |
2020 | Lincoln | Nautilus | Base, Black Label, Reserve | 2.0L L4 - Gas |
2019 | Ford | Edge | SE, SEL, Titanium | 2.0L L4 - Gas |
2019 | Ford | Ranger | Lariat, XL, XLT | 2.3L L4 - Gas |
2019 | Ford | Transit Connect | Titanium, XL, XLT | 2.0L L4 - Flex |
2019 | Lincoln | Nautilus | Base, Black Label, Reserve, Select | 2.0L L4 - Gas |
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.