Ford Fusion Edge MKC Turn Signal Switch For Rain Sensing And Lane Assist Only

This Turn Signal Switch is designed to fit Ford Fusion, Edge, and MKC models with rain sensing wipers and lane assist. It is a brand new OEM part, sold in the manufacturer's packaging, and is not an aftermarket product. This switch is an added feature that allows for easy control of turn signals, headlights, and wipers while driving, providing a safe and comfortable driving experience.

Installation Instructions:

To replace the old turn signal switch with the new one, you will need a flathead screwdriver, pliers, and a socket set. The skill level needed for this job is intermediate, and it should take about 2-3 hours to complete.

1. Remove the steering wheel cover from the steering column.
2. Locate the old turn signal switch on the steering column.
3. Disconnect any electrical connectors or wiring harnesses connected to the old switch.
4. Use the socket set to remove any bolts or brackets that hold the old switch in place.
5. Remove the old switch from the steering column.
6. Insert the new switch into place and align it with the steering column.
7. Use the socket set to secure any bolts or brackets that hold the new switch in place.
8. Connect any electrical connectors or wiring harnesses to the new switch.
9. Test the new switch by operating the turn signals, headlights, and wipers while driving.
10. Reinstall the steering wheel cover onto the steering column.

The vehicle fitment for this Turn Signal Switch is as follows:

• Ford Fusion with Rain Sensing and Lane Assist
• Ford Edge with Rain Sensing and Lane Assist
• Ford MKC with Rain Sensing and Lane Assist

Note: This switch is designed specifically for models with rain sensing wipers and lane assist. It may not work properly on other models or trims.

VEHICLE FITMENT