This Genuine OEM auto part is a transmission output shaft and gear designed specifically for 2020-2023 Lincoln Aviator models equipped with a 3.0 engine. Identified by the part number "L1MZ-7060-E", this component is integral to the operation of the vehicle's transmission system. The output shaft and gear relay the transmission's power to the drive wheels. In cases where there's damage or wear on the existing part, replacing it with this genuine component ensures the efficient transmission of power and maintains the smooth performance of the Lincoln Aviator for the specified model years from 2020 to 2023.
This is a brand new genuine part in OEM manufacturer's packaging. It is not an aftermarket part, but the same exact piece you would purchase from a new car dealership.
Fluid Catch Pan
1. Park the Lincoln Aviator on a level surface and turn off the ignition.
2. Using a socket set, remove the underbody protection or shield to access the transmission.
3. Position the fluid catch pan beneath the transmission to catch any fluid that might leak during the process.
4. Using a socket set and wrench, disconnect the drive shaft from the transmission output shaft.
5. Support the transmission with the transmission jack.
6. Carefully remove the old output shaft and gear from the transmission.
7. Install the new Genuine OEM transmission output shaft and gear (L1MZ-7060-E) into the transmission.
8. Reconnect the drive shaft to the new transmission output shaft and tighten securely with the socket set and wrench.
9. Remove the transmission jack and ensure everything is securely in place.
10. Refill any lost transmission fluid according to the vehicle manufacturer's specifications.
11. Replace the underbody protection or shield using the socket set.
12. Start the vehicle and check for any abnormal noises or vibrations.
Duration: This task usually takes about 3-4 hours.
Skill Level: Advanced