2002-2006 Camry Back Deck Speaker Grille Replacement Instructions

May 13, 2021

2002-2006 Camry Back Deck Speaker Grille Replacement Instructions

Step By Step Instructions on replacing the rear deck speaker covers on 2000-2006 Camry.

(Note Have a Shop Vac Ready, You are going to need it).

See Latest Price 

 

Installation Instructions:

1. Wedge a flat head screwdriver under the edge of the speaker grill.

2. Pry up on the grill. There are several retaining clips holding the grill in place. You may end up breaking these clips off to remove the grill. It's okay to do so because you will be replacing these covers with new ones.

3.Work the screwdriver all the way around the edge of the speaker cover. If you can get your fingers underneath the cover, it may make it easier to pry the cover up. Once the cover is removed, clear the mounting brakes of any broken retainer clip pieces.

4. Slide the new speaker cover into place. Push on the cover until the speaker cover snaps into place.

Be careful! Many companies and dealers are still selling the old design because it is cheaper and they can make more profit. If you get the old design you will just have the same problem again in just a few months. We only sell the new design grilles.

Also be sure to have a vacuum handy when all the little pieces fall down into the speaker, you'll want to vacuum those pieces out




Also in Conquest Auto Parts Showcase

Ford GatorBack Splash Guards are the ultimate upgrade to your Ford Truck
Ford GatorBack Splash Guards are the ultimate upgrade to your Ford Truck

September 21, 2021

Ford Gatorback Logo Mud Flaps Are Manufactured In Canada To Give Your Truck The Best Look From The Highest Quality Mud Guards On The Market! Not Only Are The Gatorback Mud Flaps Functional, Featuring A 1/2" Thick Rubber Flap, But They Add The Style With Embossed Stainless Steel Plates .

View full article →

How To Fix Your Airbag Warning Light on 2004-2008 Ford F-150 With Sensor Repair kit
How To Fix Your Airbag Warning Light on 2004-2008 Ford F-150 With Sensor Repair kit

August 31, 2021

After a few years the sensor and the wiring pigtail that connects to it become corroded. Once the corrosion reaches a certain level, contact is no longer established between the pigtail and the sensor causing your airbag light to come on.

 

The good news is the fix is very easy in the parts needed are not very expensive.

View full article →

2011 to 2016 Ford Explorer Door Trim Molding How to replace the keypad version with the non-keypad version.
2011 to 2016 Ford Explorer Door Trim Molding How to replace the keypad version with the non-keypad version.

August 31, 2021

Installation is really easy to do yourself, the molding comes with to push and retainers pre-installed from the factory. These retainers are for holding it in line as you install with the pre-installed super strong 3M adhesive tape.

View full article →